¶ PrusaSlicer Configuration Profiles
All of the following PrusaSlicer Configuration Profiles are compatible with PrusaSlicer 2.6.0-alpha or higher. Download and install the latest version instance available of PrusaSlicer 2.6.0 from here.
¶ AnkerMake Official Profiles
Profiles officially from AnkerMake will be automatically downloaded and installed upon your selection of your AnkerMake M5 printer within the Configuration Assistant screen and will be shown as options once you complete the assistant window.
¶ Community Developed Profiles
While AnkerMake provides profiles directly with PrusaSlicer, but two sets of profiles are available that offer additional capabilities from the community. The approach of how to set them up differ, but both have yielded exceptional print results for community members just like yourself! Give them a try today!
¶ AnkerMake Community Edition (CE) Profiles
Developed and maintained by just-trey, the AnkerMake CE Profiles provide an overall balanced array of print settings and are recommended by the community for a balance of adequate quality and speed. To learn more and how to install them, please go to the following GitHub repository:
¶ TheMasterOfTech (TTA) Profiles
Developed and maintained by TheMasterOfTech (Discord Username: The Technical Ace#7777), his profiles prioritize quality over speed and have been recommended by the community if needing prints with exceptional quality with a slight cost of speed. His profiles are also compatible with the AnkerMake (alpha) slicer. To learn more and how to install them, please go to the following GitHub repository: